7/16″ Old Mill® Panel

Siding that Delivers Expert Craftsmanship for Unbeatable Value

Our product is engineered to provide Tru Curb Appeal. With a highly paintable, textured surface, TruWood® 7/16 in. Old Mill® Panel Siding provides the look of cedar without checks or cracks that can detract from the appearance of your project.

TruWood® Siding combines competitive prices and high quality to set a new industry standard for value. Expert craftsmanship and proven performance make TruWood® Siding an excellent choice for today’s quality and value conscious builders.

Features & Benefits

  • Quality engineered surface and core
  • 30-year limited warranty
  • Pre-primed for improved weatherability
  • Matching TruWood® Trim
  • Installs 25-40% faster than cement or vinyl sidings
  • Use for residential single-family, multi-family housing, remodeling and light commercial projects
  • Easy and safe to install using normal woodworking tools. No silica dust.
  • Certified by the Forest Stewardship Council®
    (FSC®-C002971)

Resists mildew, rot, and termite damage. Naturally-occuring additive, safe for use around children and pets.

  • Store siding flat and support on stringers to avoid sagging and contact with the ground.
  • Siding must be covered and protected from the elements.
  • Stack no more than eight units high.
  • Allow siding to acclimatize to local conditions prior to installation.

Meets the requirements of the following:

  • 2024 International Building Code
  • 2024 International Residential Code
  • ICC ESR-2588
  • ANSI A135.6-2012 (R2020)
  • Wildland-Urban Interface (WUI) Approved*
  • Fire rating = Class C
  • R Value = 0.67 (hour) (Sq. Ft.) (Fahrenheit) per BTU
  • 1/2 in. Lap Siding = No Shear Value

*WUI APPLICATION REQUIREMENTS

  • Framing must not exceed 16 in. on center.
  • Minimum 5/8 in. Type-X gypsum exterior sheathing is required.

CAL. PROP 65 WARNING: Use of this product may result in exposure to wood dust, known to the State of California to cause cancer.

Available Profiles

TruWood engineered wood products, 1/2" Old Mill Panel Siding specifications

1/2 in. OLD MILL® 808 Striated Groove
7/16 in. 3/8 in. Groove
7/16 in. Sturdy Panel

TruWood engineered wood products, 1/2" Old Mill Panel Siding specifications

7/16 in. OLD MILL®
8 in. O.C. Channel Groove – 3/4 in. Groove (also available in 4 ft. x 7 ft. and 4 ft. x 9 ft. panels)

TruWood engineered wood products, 1/2" Old Mill Panel Siding specifications

7/16 in. OLD MILL®
12 in. Reverse Board and Batten – 1-3/16 in. Groove

TruWood engineered wood products, 1/2" Old Mill Panel Siding specifications

7/16 in. OLD MILL® Square Edge
7/16 in. Smooth Square Edge

Specifications

Panel SizePc/UnitSq. Ft. Coverage /PieceApprox. Coverage Sq. Ft./UnitSq. Ft. Needed To Cover 1,000 Sq. Ft. of AreaApprox.
Weight Lbs./Unit
7/16 in. x 48-13/16 in. x 7 ft.4528113411002050
7/16 in. x 48-13/16 in. x 8 ft.4532129611002400
7/16 in. x 48-13/16 in. x 9 ft.**4536145811002560
1/2 in. x 48-13/16 in. x 8 ft.3732106611002270
Panel StyleSizesSurface Texture
Sturdy Panel 3/8 in. Groove 8 in. O.C.7/16 in. x 48-13/16 in. x 8 ft.Old Mill®
3/4 Channel Groove 8 in. O.C.7/16 in. x 48-13/16 in. x 7 ft.Old Mill®
3/4 Channel Groove 8 in. O.C.7/16 in. x 48-13/16 in. x 8 ft.Old Mill®
3/4 Channel Groove 8 in. O.C.7/16 in. x 48-13/16 in. x 9 ft.**Old Mill®
Reverse Board & Batten 12 in. O.C.7/16 in. x 48-13/16 in. x 8 ft.Old Mill®
3/8 in. Striated Groove 808
8 in. O.C.
1/2 in. x 48-13/16 in. x 8 ft.Old Mill®
Square Edge (Plain)7/16 in. x 4 ft. x 8 ft.Old Mill® & Smooth
Adobe Panel Siding Shiplap Edge1/2 in. x 48-13/16 in. x 8 ft.Adobe™

* Assumes 10% waste factor for cutting and fitting. All grooved panels are shiplapped on the long edges and cut oversize to provide 48 in. net coverage when applied.
** Limited availability

Old Mill® Soffit

Soffit SizePc/BundlePc/UnitMax. Exposure (in)Sq. Ft. Coverage /PieceActualSq. Ft./Uni Approx. Coverage Sq. Ft. Needed To Cover 1,000 Sq. Ft. of AreaApprox.
Weight (Lbs/Unit)
7/16 in.61261621.33.395 in. x 16 in. x 16 ft.268810504405